6.1 Field Bus Network Support
232 SIEPYEUOQ2A01G AC Drive Q2A Technical Manual
6.1 Field Bus Network Support
You can use the PLC to control and monitor the drive through the network. The drive has a standard RS-485
interface (Modbus communications). Install a separately sold communication option on the drive to support other
network communications.
◆ Available Communication Options
The following field bus networks are compatible with the drive. Contact the manufacturer or your nearest sales
representative to order a communication option.
Table 6.1 Available Field Bus Network
Type of Communications Option model
EtherCAT SI-ES3
PROFINET SI-EP3
EtherNet/IP SI-EN3
To Next Page
Loading...
Need help?
General