R&S RTC1000 - Page 295

Remote Commands Reference
R&S
®
RTC1000
295User Manual 1335.7352.02 ─ 02
BUS<b>:UART:FRAMe<n>:WORD<o>:VALue?
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame.
<o> Selects the word number.
Return values:
<Value> Decimal value
Range: 0 to 511
Increment: 1
Usage: Query only
BUS<b>:UART:FRAMe<n>:WORD<o>:STARt?
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame.
<o> Selects the word number.
Return values:
<StartTime> Range: depends on sample rate and time base
Default unit: s
Usage: Query only
BUS<b>:UART:FRAMe<n>:WORD<o>:STOP?
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame.
<o> Selects the word number.
Return values:
<StopTime> Range: depends on sample rate and time base
Default unit: s
Usage: Query only
BUS<b>:UART:FRAMe<n>:WORD<o>:STATe?
Suffix:
<b>
.
1, 2
Selects the bus.
Protocol Analysis