DEACTIVATING INTELLIGENT
STOP/START
To switch the Intelligent stop/
start system off, press the
Intelligent stop/start button. For
more information, see 304,
DRIVER CONTROLS.
To confirm that the system has been
switched off, the button LED will
extinguish, and the message Auto Stop/
Start Off is momentarily displayed in the
Message centre.
If the Intelligent stop/start button is
pressed while there is a fault with the
system, or the system is inhibited by the
selection of a Terrain response mode, the
message Auto stop/start Not Available
is momentarily displayed in the Message
centre.
Note: If the Intelligent stop/start button
is pressed while an automatic engine stop
is in progress, the engine will restart.
Note: The Intelligent stop/start system
will automatically reactivate the next time
the vehicle's ignition is switched on.
DRIVER EXIT
Note: The Driver exit feature is only
available when Intelligent stop/start is
enabled.
To prevent the vehicle from being
inadvertently left in a driveable condition,
the vehicle will detect when a driver is not
present, and automatically switch off the
ignition system.
If Drive (D), Sport (S) or Neutral (N) is
selected, the Driver exit feature will switch
the vehicle's ignition off if the following
conditions exist:
• All vehicles: The driver's seat belt is
unbuckled, and:
• Automatic transmission only: The
brake pedal is released.
• Manual transmission only: The driver's
door is opened.
If Park (P) is selected, the Driver exit
feature will switch the vehicle's ignition
off, if the driver's seat belt is unbuckled.
Once the vehicle's ignition has been
switched off, the vehicle can be locked, if
required. See 15, LOCK
CONFIRMATION.
104
Intelligent stop/start
© Jaguar Land Rover Limited 2015
To Next Page
Loading...
