EasyManua.ls Logo

Range Rover Evoque - DETECTION BEAM ISSUES

Range Rover Evoque
305 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A failure has occurred while the system
is active.
That using maximum ACC braking only
is not sufficient.
Note: ACC only operates when the gear
selector is in Drive (D) or Sport (S).
Note: When ACC is engaged, the
accelerator pedal rests in the raised
position. Fully release the pedal to allow
normal ACC operation.
Note: When braking is applied by the
ACC system, the vehicle's brake lamps will
illuminate.
Note: When Intelligent stop/start is fitted,
it may operate during a Queue assist stop.
Press the accelerator pedal for longer than
normal to restart the engine and move off.
DETECTION BEAM ISSUES
Detection issues can occur:
1. When driving on a different line to the
vehicle in front.
2. When a vehicle edges into your lane.
The vehicle will only be detected once
it has moved fully into your lane.
133
Adaptive cruise control
R
© Jaguar Land Rover Limited 2015

Table of Contents

Other manuals for Range Rover Evoque

Related product manuals