CLIMATE CONTROL
Note: The Climate control system
removes moisture from the air and
deposits the excess water beneath the
vehicle. Puddles may form but this is
normal and is no cause for concern.
Note: The LED indicator lamps in the
switches will illuminate when the function
is selected.
1. Temperature controls: Rotate to adjust
the individual driver/passenger
settings.
Note: The system will not achieve a
temperature differential from left to
right of more than 4°C.
2. MAX: Maximum defrost program.
Press to remove frost or heavy misting
from the windscreen. The system will
adjust the front blower output for
maximum clearing. In addition, the
windscreen heaters will be activated.
Press again to switch off the defrost
mode. The screen heaters will remain
on for a timed period.
Note: In low temperatures, it is
advisable to close the centre face level
vent and direct air flow from the outer
face level vents towards the side
windows. This will help to keep the
windows clear of ice.
3. Air distribution: An LED will illuminate
in the selected switches.
Note: More than one setting may be
selected at a time to achieve the
desired distribution.
4. AUTO mode: For fully automatic
operation.
AUTO mode should be used as the
normal operating mode. The air
conditioning, heating and ventilation
controls automatically provide an
optimum environment at the selected
temperature.
To resume fully automatic operation
at any time, press the AUTO button.
5. Heated windscreen: The heater will
operate for a predetermined timed
period before automatically switching
off.
83
Heating and ventilation
© Jaguar Land Rover Limited 2015
To Next Page
Loading...
