Range Rover Evoque - Rear seats; FOLDING AND RAISING THE REAR SEATS

FOLDING AND RAISING THE
REAR SEATS
Always make sure that objects
carried in the vehicle are secured
properly.
Never allow passengers to travel
in the loadspace, under any
circumstances.
Make sure that when the seatback
is raised, the locking mechanism
is fully engaged. If the seatbacks
are not fully locked in place, red
markers will be visible around the
seatback release buttons.
When raising the rear seats, make
sure that seat belts are correctly
routed and not trapped behind
the seats.
Make sure that the head restraints
are raised to the correct position
before the seats are used by a
passenger.
To accommodate loads and still retain
seating for passengers, the rear seats on
the 5 door vehicles can be folded
completely, or partially at a 60/40 split.
To fold part or all of the seat:
1. First press in the adjusting collar then
fully lower the head restraints.
Note: Adjusting collar positions are
dependent on the seat position. Right
side position, collar at base of the right
pillar. Left and centre positions, collar
on the left side.
2. Press a seatback release button, then
fold the appropriate seatback fully
forward.
Raising a folded seat is a reversal of the
folding process.
25
Rear seats
R
© Jaguar Land Rover Limited 2015