Range Rover Evoque - DIRECTION INDICATOR BULB REPLACEMENT

DIRECTION INDICATOR BULB
REPLACEMENT
See 202, CHANGING A BULB.
To gain more room for accessibility, follow
the steps for removing the appropriate
headlamp unit.
Replacing a direction indicator bulb:
1. To remove the bulb holder, press in
the outer wings on the black plastic
unit and pull the holder free of the
housing.
2. To separate the bulb holder from the
electrical connector, first push up the
connector lock.
3. Push in the release mechanism while
pulling the connector and bulb holder
apart.
Note: Note the orientation of the bulb
unit to aid refitting.
207
Maintenance
R
© Jaguar Land Rover Limited 2015