Pairing using the phone or device
(preferred method):
1. Switch the ignition on and make sure
that the Touch screen is active.
2. Select General settings, then
Bluetooth.
3. From the list, select Make system
discoverable.
4. Switch on your phone or device’s
Bluetooth wireless technology device
connection. Using your phone or
device, search for and select your
vehicle's Bluetooth connection (see
your phone or device’s operating
instructions for more information).
5. A Passkey number is displayed on the
phone or device. If this number
matches the number on the Touch
screen, touch Yes, or press Pair on the
phone or device.
Pairing using the Touch screen
1. Switch on your phone or device’s
Bluetooth wireless technology device
connection. Make sure that your phone
or device is in Bluetooth wireless
technology device discoverable
mode, sometimes referred to as find
me mode (see your phone or device’s
operating instructions for more
information).
2. Switch the ignition on and make sure
that the Touch screen is active.
3. Select General settings then
Bluetooth.
4. Select Search for Bluetooth Devices.
5. The system searches for a phone or
device and, if found, the phone or
device displays on the screen.
6. Select the required device.
If the phone or device is not found,
NO DEVICES FOUND displays.
Note: The phone/device list can store
up to four entries.
7. A Passkey number is displayed on the
phone or device. If this number
matches the number on the Touch
screen, touch Yes.
8. When a phone or device is paired, it
is included in the connected device's
list and on the PHONE screen. It also
appears in the Bluetooth, List of
paired devices section.
164
Bluetooth®
© Jaguar Land Rover Limited 2015
To Next Page
Loading...
