Remote Climate
• The Remote Climate page allows the
engine of an automatic transmission
vehicle to be started remotely, and run
for up to 30 minutes to provide a
comfortable temperature inside the
cabin in advance of the driver entering
the vehicle. Press the Engine START
button on the Remote Climate page
and enter a PIN. A target temperature
can be set.
Remote climate will not function if any
of the following conditions exist:
• The vehicle's fuel level is low.
• The vehicle's battery charge level
is low.
• The vehicle is not locked.
• A window, door, bonnet, or the
luggage area is open.
• The engine has been manually
started.
• There is a system error with a
required vehicle system.
• A theft has been detected.
• The vehicle's alarm is sounding.
• A crash event has been detected.
• The hazard warning lamps are
switched on.
• The automatic transmission is not
in Park (P).
• The brake pedal is pressed.
Note: Some markets may prohibit the
use of a remote engine start. It remains
the responsibility of the driver to know
if this function can legally be used.
Note: This feature is also available for
vehicles fitted with a Timed climate
system. If the vehicle configuration
(e.g., transmission or engine variant)
does not support a remote engine
start, or if the vehicle originated in a
market with legal restrictions on a
remote engine start, then the Timed
climate system may be used to support
the cabin pre-conditioning.
Vehicle Security
Remote Premium adds additional
functionality to the Vehicle Security page,
allowing the user to lock and unlock the
vehicle remotely. If either lock or unlock
cannot be performed an error message
will be displayed on the screen. For added
security, this function requires a PIN code
to be entered.
When the vehicle is locked remotely, it will
be secured to the maximum possible level
allowed in the market in which the vehicle
was intended for original sale.
Note: In some markets, remote closing of
windows is not permitted.
When the vehicle is unlocked remotely, it
will relock after 45 seconds if no door or
aperture is opened.
If an alarm alert is received, the vehicle's
alarm can be reset from your current
position.
Note: Regardless of which screen is
currently displayed, if the vehicle's alarm
is sounding, a pop-up screen appears with
an option to reset the alarm. The alarm
may also be reset via the Vehicle Security
screen.
Note: It remains the responsibility of the
driver to know the location of the vehicle
and to make sure that the vehicle is
secured.
172
InControl
© Jaguar Land Rover Limited 2015
To Next Page
Loading...
