The head restraints can be removed, if
required (e.g., to fit larger child seats). To
remove a head restraint, first raise the
head restraint to its uppermost position.
With the adjusting collar pressed in, lift
the restraint out of the seatback.
To refit a head restraint, make sure it is
facing the correct direction, insert the
stems of the head restraint into the
sockets and push it downwards until at
least the first click.
1. To raise, pull the head restraint
upwards.
2. To lower, press in the adjusting collar
and push down on the head restraint.
28
Head restraints
© Jaguar Land Rover Limited 2015
To Next Page
Loading...
