Ricoh B132 - Page 508

SERVICE PROGRAM TABLES
B132/B200 5-30 SM
1200 1st CMP Down
This SP adjusts the temperature of the heating roller at the start of the CMP down
modes for black-and-white copying in normal/high temperature environments.
1st CPM Down 1st CMP Down (Heating Roller Temperature)
001 StrTemp:Low/Hi:1C
002 StrTemp:Low/Hi:FC
Normal temperature, high temperature environment
[–20~0/1 deg.]
003 StrTemp:Low:1C
004 StrTemp:Low:FC
Low temperature environment
[–20~0/1 deg.]
005 CPM Norm/Hi:1C Normal, high temperature environment, A4 SEF
[10~60/5 cpm]
006 CPM Norm/Hi:FC Normal, high temperature environment, A4 SEF
[10~60/5 cpm]
007 CPM Low Temp:1C Low temperature environment, A4 SEF
[10~60/5 cpm]
008 CPM Low Temp:FC Low temperature environment, A4 SEF
[10~60/5 cpm]
2nd CPM Down 2nd CPM Down
009 CPM Norm/Hi:1C Normal, high temperature environment, A4 SEF
[10~60/5 cpm]
010 CPM Norm/Hi:FC Normal, high temperature environment, A4 SEF
[10~60/5 cpm]
011 CPM Low:1C Low temperature environment, A4 SEF
[10~60/5 cpm]
012 CPM Low:FC Low temperature environment, A4 SEF
[10~60/5 cpm]
3rd CPM Down:Thk 3rd CPM Down: Thick Paper
013 1C:60/45/30cpm
CPM down settings (based on A4 SEF) for black and white.
[0~4/1]
0：60 cpm 1：50 cpm 2：45 cpm 3：30 cpm）
014 FC:45/25/15cpm
CPM down settings (based on A4 SEF) for full color.
[0~4/1]
0：60 cpm 1：50 cpm 2：45 cpm 3：30 cpm）
015 (0:Yes 1:No) Switches the CPM down feature on/off
0:OFF 1:ON
1201 HtgRoll L2:Hys Heating Roller 2: Hysterisis On/Off
This SP adjusts the control temperature of the heating roller when Lamp 2 in the
heating roller is switched on.
001 On [-5.-~+5.0/0.5]
Note: Every “0.1” increment adjusts temperature “0.1 deg.”
002 Off Switches off Lamp 2, no adjust allowed.