Ricoh D129 - Page 1045

Error Codes
SM 27 D629
Fax Option
Type 5002
(D629)
Code Meaning Suggested Cause/Action
2-11
Only one V.21 connection flag
was received
 Replace the FCU.
2-12 Modem clock irregularity  Replace the FCU.
2-13 Modem initialization error  Turn off the machine, then turn it back on.
 Update the modem ROM.
 Replace the FCU.
2-22 Counter overflow error of
JBIG chip
If error occurs frequently, change the settings
for resolution, paper size, compression type.
2-23 JBIG compression or
reconstruction error
Turn off the machine, then turn it back on.
2-24 JBIG ASIC error  Turn off the machine, then turn it back on.
2-25
JBIG data reconstruction error
(BIH error)
 JBIG data error
 Check the sender’s JBIG function.
 Update the FCU ROM.
2-26
JBIG data reconstruction error
(Float marker error)
2-27
JBIG data reconstruction error
(End marker error)
2-28
JBIG data reconstruction error
(Timeout)
2-29 JBIG trailing edge maker error  FCU defective
 Check the destination device.
2-50
The machine resets itself for a
fatal FCU system error
 If this is frequent, update the ROM, or
replace the FCU.
2-51 The machine resets itself
because of a fatal
communication error
 If this is frequent, update the ROM, or
replace the FCU.