Main SP Tables-5
D129/D130 5-60 SM
003
Function Flag
Enables or disables the remote service function.
[0 to 1 / 0 / 1 /step]
0: Disabled, 1: Enabled
NOTE: This SP setting is changed to "1" after @Remote registration has
been completed.
004
Communication Test Call
This SP issues a test call from a GW machine to determine whether it can
communicate successfully with the call center after it has been set up for
NRS. Successful return will be in the range 0 to 99.
005
Device Information Call
This SP issues a call to notify the NRS device information to the call center.
Successful return will be in the range 0 to 99.
007
SSL Disable
Uses or does not use the RCG certification by SSL when calling the RCG.
[0 to 1 / 0 / 1 /step]
0: Uses the RCG certification
1: Does no use the RCG certification
008
RCG Connect Timeout
Specifies the connect timeout interval when calling the RCG.
[1 to 90 / 30 / 1 second /step]
009
RCG Write Timeout
Specifies the write timeout interval when calling the RCG.
[0 to 100 / 60 / 1 second /step]
010
RCG Read Timeout
Specifies the read timeout interval when calling the RCG.
[0 to 100 / 60 / 1 second /step]
To Next Page
Loading...
