Ricoh D129 - Page 522

Service Call Conditions
SM 6-33 D129/D130
Trouble-
shooting
-43 -
Finisher corner stapler rotation motor error
The stapler does not return to its home position within the specified time
after stapling.
The 1st detection failure causes a jam error, and the 2nd failure causes this
SC code.
 Defective stapler rotation motor
 Overload on the stapler rotation motor
 Defective stapler rotation HP sensor
-44 -
Finisher corner stapler motor error
The 1st detection failure causes a jam error, and the 2nd failure causes this
SC code.
 The stapler motor does not switch off within the prescribed time after
operating.
 The HP sensor of the staple unit does not detect the home position after
the staple unit moves to its home position.
 The HP sensor of the staple unit detects the home position after the
staple unit moves from its home position.
 Staple jam
 Motor overload
 Defective stapler motor