System SP Tables-2
D129/D130 3-28 SM Appendix
2310*
Current: Paper Type Correction (SSP)
Adjust the transfer current for each paper type. If the transfer current of
image area is set highly than normal, the print image is easily come out. If
the leading transfer current is set as same, the black line is come out due to
exfoliation leave.
001
Image 1st Side: Thick 1
[10 to 100 / 18 / 1
A]
Adjusts the transfer current for printing the first side of the paper (Thick 1).
002
Leading Edge 1st Side: Thick 1
[10 to 100 / 15 / 1 A]
Adjusts the transfer current for copying at leading edge the first side of the
paper. Increase the current to separate the paper from the drum properly in
high humidity and high temperature conditions (Thick 1).
003
Image 2nd Side: Thick 1
[10 to 100 / 18 / 1
A]
Adjusts the transfer current for printing the second side of the paper (Thick
1).
004
Leading Edge 2nd Side: Thick 1
[10 to 100 / 15 / 1
A]
Adjusts the transfer current for copying at leading edge the second side of
the paper (Thick 1). Increase the current to separate the paper from the
drum properly in high humidity and high temperature conditions.
005
Image: Thick 2
[10 to 100 / 18 / 1
A]
Adjusts the transfer current for printing (Thick 2).
006
Leading Edge: Thick 2
[10 to 100 / 15 / 1
A]
Adjusts the transfer current for copying at the leading edge of paper (Thick
2). Increase the current to separate the paper from the drum properly in high
humidity and high temperature conditions.
To Next Page
Loading...
