Ricoh D129 - Page 633

System SP Tables-2
SM Appendix 3-29 D129/D130
Appendix:
Service
Program
Mode Tables
007
Image: OHP
[10 to 100 / 20 / 1
A]
Adjusts the transfer current for printing (OHP).
008
Leading Edge: OHP
[10 to 100 / 20 / 1
A]
Adjusts the transfer current for copying at the leading edge of paper (OHP).
Increase the current to separate the paper from the drum properly in high
humidity and high temperature conditions.
009
Image: Envelope
[10 to 100 / 20 / 1
A]
Adjusts the transfer current for printing (Envelope).
010
Leading Edge: Envelope
[10 to 100 / 20 / 1 A]
Adjusts the transfer current for copying at the leading edge of paper
(Envelope). Increase the current to separate the paper from the drum
properly in high humidity and high temperature conditions.
011
Image 1st Side: M-Thick
C2b: [10 to 100 / 24 / 1
A]
C2c: [10 to 100 / 32 / 1
A]
Adjusts the transfer current for printing the first side of the paper (M-Thick).
012
Leading Edge 1st Side: M-Thick
[10 to 100 / 20 / 1
A]
Adjusts the transfer current for copying at leading edge the first side of the
paper (M-Thick). Increase the current to separate the paper from the drum
properly in high humidity and high temperature conditions.
013
Image 2nd Side: M-Thick
C2b: [10 to 100 / 24 / 1
A]
C2c: [10 to 100 / 32 / 1
A]
Adjusts the transfer current for printing the second side of the paper
(M-Thick).