Main SP Tables-4
D158/D159/D160/D161/D170 3-74 SM Appendix
4918
[Man Gamma Adj] (DFU) (D158/D159 )
Adjusts the manual gamma for Copy/Photo or Copy/Text with the soft keys on
the operation panel.
009
Man Gamma Adj ENG
[- / - / -]
4921 [Image Adj Select] (D160/D161/D170)
001
Copy *ENG
[0 to 10 / 0 / 1 / step]
Selects which mode the settings from SP4-922 to SP4-932 are used for.
0 = None, 1 = Text 1, 2 =Text 2, 3= Photo 1, 4 = Photo 2, 5 = Photo 3,
6 = Special 1, 7 = Special 2, 8 = Special 3, 9 = Special 4, 10 = Special 5
4922 [Scanner Gamma] (D160/D161/D170)
001
Copy *ENG
[0 to 2 / 0 / 1 / step]
Selects "text" or "photo" as the priority output mode. This setting is
applied to all image processing modes of SP4-921.
[0=System default / 1=Text / 2=Photo]
4923 [Notch Selection] (D160/D161/D170)
001
Copy *ENG
[-1 to 1 / 0 / 1 / step]
Selects the value of the center ID adjustment notch for the ID adjustment LEDs.
Normally the center notch is 3 (range 1-5). If -1 is selected, each notch
shifts down
(becomes lighter). If +1 is selected, each notch shifts up (becomes darker).
This setting is applied to all image processing modes of SP4-921.
To Next Page
Loading...
