Main SP Tables-4
SM Appendix 3-75 D158/D159/D160/D161/D170
Service
Program
Mode Tables
4926 [Texture Removal] (D160/D161/D170)
001
Copy *ENG
[0 to 6 / 0 / 1 / step]
Adjusts the texture removal level that is used with error diffusion. 0: The default
mode is used. Text 1, Photo 2, Special 2, and Special 5 have a default of 3 and
Photo 1, 3
have a default of 6.
1: No removal applied.
2 – 6: Removal applied at the level specified here.
The higher the setting (level), the less clear the image will become (more
texture removal). This setting is only applied to the originals in SP4-921.
4927 [Line Width] (D160/D161/D170)
001
Copy *ENG
[-2 to 2 / 0 / 1 / step]
Adjusts the line width correction algorithm. Positive settings produce thicker
lines; negative settings produce thinner lines. This setting is only applied to the
originals in SP4-921.
4928 [IndpndntDot Erase] (D160/D161/D170)
001
Copy *ENG
[-2 to 2 / 0 / 1 / step]
Selects the dot erase level. Higher settings provide greater erasure. This setting
is only appliedto the originals in SP4-921.
4929 [Positive/Negative] (D160/D161/D170)
001
Copy *ENG
[0 or 1 / 0 / 1 / step]
Inverts white and black. This setting is only applied to the originals
in SP4-921.
To Next Page
Loading...
