Ricoh D158 - Page 534

Main SP Tables-4
D158/D159/D160/D161/D170 3-76 SM Appendix
4930 [Sharpness-Edge] (D160/D161/D170)
001
Copy *ENG
[-2 to 2 / 0 / 1 / step]
Adjust the clarity. This setting is only applied to the originals in SP4-921.
4931 [Sharpness-Solid] (D160/D161/D170)
001
Copy *ENG
[-2 to 2 / 0 / 1 / step]
Adjust the clarity. This setting is only applied to the originals in SP4-921.
4932 [Sharpness-LowID] (D160/D161/D170)
001
Copy *ENG
[-2 to 2 / 0 / 1 / step]
Adjust the clarity. This setting is only applied to the originals in
SP4-921.
4941 [White Line Erase] (D160/D161/D170)
001
White Line Erase *ENG
[0 to 2 / 0 / 1 / step]
Selects the white line erase level.
0: None 1: Weak 2: Strong
• This setting is effective for all modes.
• 0: White line erase is not used, and white level correction is used instead.
• This setting is applied regardless of what mode has been selected in SP4-921.
4942 [Black Line Erase] (D160/D161/D170)
001
Black Line Erase *ENG
[0 to 3 / 2 / 1 / step]
Selects the black line erase level. This setting is effective only when originals
are scanned by the DF.
[0 = No / 1 = Very weak / 2 = Weak / 3 = Strong]
This setting is applied regardless of what mode has been selected in SP4-921.