TYPE M1
(D702)
0D: Holland 21: Greece
0E: Spain 22: Hungary
0F: Israel 23: Czech
10: --- 24: Poland
11: USA
System Switch 10 (SP No. 1-101-017)
No Function Comments
0-7
Threshold memory level for
parallel memory transmission
Threshold = N x 128 KB + 256 KB
N can be between 00 - FF(H)
Default setting: 02(H) = 512 KB
System Switch 11 (SP No. 1-101-018)
No Function Comments
0
TTI printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
Change this bit to 1 if the TTI overprints
information that the customer considers to be
important (G3 transmissions).
If "1" is selected, it is possible that
sent data is printed on two sheets of
paper.
1
CIL printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
Change this bit to 1 if the CIL overprints
information that the customer considers to be
important (G3 transmissions).
3
TTI used for broadcasting
0: The TTIs selected for each
Quick/Speed dial are used
1: The same TTI is used for all
destinations
1: The TTI (TTI_1 or TTI_2) which is selected
for all destinations during broadcasting.
7
G4 quick memory data sending
0: Disabled 1: Enabled
Change this bit to 1 when sending G4 quick
memory data.
To Next Page
Loading...
