Ricoh D158 - Page 929

Bit Switches - 3
SM 87 D702
FAX OPTION
TYPE M1
(D702)
Communication Switch 04 (SP No. 1-104-005)
No Function Comments
0
Remote mode switch (TEL
mode)
0: Disable
1: Enable (Active)
Set this bit to ON when you wish to switch TEL
mode to FAX mode remotely.
1
Remote mode switch (FAX
mode)
0: Disable
1: Enable (Active)
Set this bit to ON when you wish to turn on the
remote mode switch after automatic reception
with FAX mode.
2
Remote mode switch (AUTO
mode)
0: Disable
1: Enable (Active)
Set this bit to ON when you wish to turn on the
remote mode switch after automatic reception
with AUTO mode.
Communication Switch 05 (SP No. 1-104-006)
No Function Comments
0-3
Remote mode switch number
00-09 (0-9:HEX)
Enter the number to switch between TEL/FAX
modes using the external phone.
Communication Switch 07 (SP No. 1-104-008)
No Function Comments
0
G3/G4 auto route selection
0: Disable
1: Enable
Select whether to change the route to G4 to G3
when G4 communication failed.
4
G3/G4 auto route selection
(when communication failed)
0: Disable
1: Enable
If there is a switching system error, select
whether to switch the route to G4 to G3.
Communication Switch 09 (SP No. 1-104-009)
No Function Comments
0-7
Minimum interval between
automatic dialing attempts
This value is the minimum time that the machine
waits before it dials the next destination.