Ricoh M160 - Page 276

Service Call
M160/M161 6-32 SM
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC672-13 D
Controller start up error
The operation panel detected that the controller is down.
 Controller stalled
 Board installed incorrectly
 Controller board defective
 Operation panel connector is loose, broken, or defective
 Controller's late response
 Turn the main power off/on.
 Check the connection of the controller board.
 Replace the controller board.
 Check the control panel harness.
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC672-99 D
Controller start up error
The operation panel software ended abnormally.
 Controller stalled
 Board installed incorrectly
 Controller board defective
 Operation panel connector is loose, broken, or defective
 Controller's late response
 Turn the main power off/on.
 Check the connection of the controller board.
 Replace the controller board.
 Check the control panel harness.