Main SP Tables-1
M160/M161 3-2 SM Appendix
3.2 MAIN SP TABLES-1
3.2.1 SP1-XXX (FEED)
1001
[User LeadEdge Reg]
Adjusts the leading edge registration by changing the registration motor
operation timing for each mode.
Increasing a value: an image is moved to the trailing edge of paper.
Decreasing a value: an image is moved to the leading edge of paper.
1-001-001 By-pass E*
[-4.0 to 4.0 / 0.0 / 0.1 mm/step]
1-001-002 Tray 1 E*
1-001-003 Tray 2 E*
1-001-004 Tray 3 E*
1-001-006 Duplex E*
1002
[User S-to-S Reg]
Adjusts the printing side-to-side registration from each paper feed station,
using the Trimming Area Pattern.
To move the start position to the right, increase the value (+).
To move the start position to the left, decrease the value (–).
1-002-001 By-pass E*
[-4.0 to 4.0 / 0.0 / 0.1 mm/step]
1-002-002 Tray 1 E*
1-002-003 Tray 2 E*
1-002-004 Tray 3 E*
1-002-006 Duplex E*
To Next Page
Loading...
