SP Mode Tables
2102
[Magnification Adj]
Sub Scan Magnification Adjustment
2-102-002 Sub Mag.:N E
[-1.0 to 1.0 / 0.0 / 0.1%/step]
2-102-004 Sub Mag.:L E
2103
[Erase Margin Adj] Image Erase Margin Adjustment
Adjusts the erase margin by deleting image data at the margins.
2-103-001 Lead Edge Width E [2.7 to 9.9 / 3.0 / 0.1mm/step]
2-103-002 Trail. Edge Width E
[0.0 to 9.9 / 2.0 / 0.1mm/step]
2-103-003 Left E
2-103-004 Right E
2103 [Erase Margin Adj] Image Erase Margin Adjustment: Back side
2-103-005 Duplex:Lead E
[0.0 to 4.0 / 0.0 / 0.1mm/step]
2-103-006 Duplex:Trail. E
2-103-007 Duplex:Left Width E
2-103-008 Duplex:RightWidth E
2104 [Exposure energy]
2-104-010 Normal Print E
[0.23 to 0.98 / 0.50 / 0.01 uJ/cm
/step]
LEDA light emission energy: Normal
printing Bk: Display/Setting
2-104-011 Nomal Discharge E
[0.23 to 0.98 / 0.70 / 0.01 uJ/cm
2
/step]
LEDA light emission energy: Quenching
pattern Normal speed: Display/Setting
2-104-012 Low Discharge E
[0.23 to 0.98 / 0.70 / 0.01uJ/cm
2
/step]
LEDA light emission energy: Quenching
pattern Low speed: Display/Setting
To Next Page
Loading...
