Ricoh M160 - Page 436

Main SP Tables-2
SM Appendix 3-23 M160/M161
Appendices:
SP Mode Tables
2931 [Supply Error]
2-931-002 0 count E*
[0 to 10000 / 0 / 1count/step]
Counter for detecting the SC364.
2-931-003 0 count Threshold E*
[1 to 50 / 30 / 1count/step]
Threshold for detecting the SC364.
2-931-004 Lower Count E*
[0 to 10000 / 0 / 1count/step]
Counter for detecting the SC332.
2-931-005 Lower Threshold E*
[1 to 10 / 5 / 1count/step]
Threshold for detecting the SC332.
2-931-006 SC332 Count E*
[0 to 10 / 0 / 1count/step]
Counts that continuously detected the
SC332.
2932 [End Detection]
2-932-001 End Count E* [0 to 10000 / 0 / 1count/step]
2-932-002 End Threshold E* [1 to 10 / 3 / 1count/step]
2940 [Remain Control]
2-940-001 Remaining Amount E*
[0.0 to 30.0 / 0.0 / 0.1g/step]
Counter for detecting toner end.
2-940-002 Remaining Time E*
[0 to 300 / 0 / 1sec/step]
Threshold for detecting toner end.
2941
[Remain Control]
Counter for supplying triggered by the front cover open/close during Power
ON.
2-941-001 closing count E* [0 to 65535 / 0 / 1count/step]