Main SP Tables-5
M160/M161 3-142 SM Appendix
5907
[Plug & Play Maker/Model Name]
Selects the brand name and the production name for Windows Plug & Play.
This information is stored in the NVRAM. If the NVRAM is defective, these
names should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time.
When the setting is completed, the beeper sounds five times.
5-907-001 - C* [- / - / -]
5913
[Switchover Permission Time]
Sets the length of time to elapse before allowing another application to take
control of the display when the application currently controlling the display
is not operating because a key has not been pressed.
5-913-002 Print Application Timer C* [0 to 30 / 3 / 1/step]
5930 [MeterClick Charge]
5-930-001 Setting E* [0 or 1 / 0 / 1/step]
5931 [Life Alert Disp.]
5-931-001 Maintenance Kit E*
[0 or 1 / 0 / 1/step]
5-931-002 PCDU E*
5967
[Copy Server: Set Function]
Enables or disables the document server. This is a security measure that
prevents image data from being left in the temporary area of the HDD. After
changing this setting, you must switch the main switch off and on to enable
the new setting.
5-967-001 (0:ON 1:OFF) C* [0 or 1 / 0 / 1/step]
To Next Page
Loading...
