SP Mode Tables
5974
[Cherry Server]
Specifies which version of ScanRouter, “Light” or “Full”, is installed.
5-974-001 (0: Light 1: Full) C* [- / 0 / -]
5985
[Device Setting]
Enables/disables the on-board device.
5-985-001 On Board NIC E*
[0 to 2 / 0 / 1/step]
When the "Function limitation" is set,
"On board NIC" is limited only for the
NRS or LDAP/NT authentication.
Other network applications
than NRS or LDAP/NT
authentication are not
available when this SP is set to
"2".Even though you can
change the initial settings of
those network applications, the
settings do not work.
0: Disable
1: Enable
2: Function limitation
5-985-002 On Board USB E*
[0 or 1 / 0 / 1/step]
0: Disable
1: Enable
5987
[Mech. Counter]
This SP detects that a mechanical counter device is removed. If it is
detected, SC610 occurs.
5-987-001 0:OFF / 1:ON E*
[0 or 1 / 0 / 1/step]
0: OFF. 1: ON
To Next Page
Loading...
