SP Mode Tables
Changes the maximum number of jobs that can be stored on the HDD.
The default (disabled) is 100. If this is enabled, the max. will be raised to
750.
bit 5 DFU - -
bit 6 Method for determining the image rotation
for the edge to bind on.
Disabled Enabled
If enabled, the image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed
orientation jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
bit 7
Letterhead mode printing Disabled
Enabled
(Duplex)
Routes all pages through the duplex unit.
If this is disabled, simplex pages or the last page of an odd-paged duplex
job, are not routed through the duplex unit. This could result in problems
with letterhead/pre-printed pages.
Only affects pages specified as Letterhead paper.
1001 [Bit Switch]
006 Bit Switch 6 Settings - -
1001 [Bit Switch]
007 Bit Switch 7 Settings 0 1
bit 0
Print path Disabled Enabled
If enabled, simplex pages (in mixed simplex/duplex PS/PCL5 jobs only)
and the last page of an odd paged duplex job (PS, PCL5, PCL6), are
always routed through the duplex unit. Not having to switch paper paths
increases the print speed slightly.
bit 1 DFU - -
bit 2 DFU - -
To Next Page
Loading...
