SP Mode Tables
bit 6 Allow use of Auto Job Promotion if
connected to an external charge device.
Does not
allow AJP
with ECD
Allows AJP
with ECD
If this is 0, Auto Job Promotion will be automatically disabled if an external
charge device is connected.
Note: We do not officially support enabling this switch (1). Use it at your
own risk.
bit 7 DFU - -
1001 [Bit Switch]
011 Bit Switch B Settings 0 1
bit 0 DFU - -
bit 1 Print job interruption Does not
allow
interruption
Allow
interruption
0 (default): Print jobs are not interrupted. If a job is promoted to the top of
the print queue, it will wait for the currently printing job to finish.
1: If a job is promoted to the top of the queue, it will interrupt the currently
printing job and start printing immediately.
bit 2 DFU - -
bit 3 DFU - -
bit 4 DFU - -
bit 5 DFU - -
bit 6 DFU - -
bit 7 DFU - -
To Next Page
Loading...
