Printer Service Mode
M160/M161 3-224 SM Appendix
Enabled (=0):
Text composed of UTF-8 characters can be displayed in the operation panel.
Disabled (=1):
UTF-8 characters cannot be displayed in the operation panel.
For example, job names are sometimes stored in the MIB using UTF-8
encoded characters. When these are displayed on the operation panel, they
will be garbled unless this switch is enabled (=0).
bit 6 Disable super option OFF ON
Switches super option disable on / off.
If this is On, multiple jobs are grouped at LPR port. PJL settings are enabled
even jobs that are specified queue names are sent.
bit 7 Enable/Disable Print from USB/SD's
Preview function
Enabled Disabled
Determines whether Print from USB/SD will have the Preview function.
Enabled (=0): Print from USB/SD will have the Preview function.
Disabled (=1): Print from USB/SD will not have the Preview function.
1001 [Bit Switch]
010 Bit Switch A Settings 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 DFU - -
bit 3 DFU - -
bit 4 DFU - -
bit 5 Auto Job Promotion locks the queue Queue is
not locked
after AJP
Queue
locked after
AJP
If this is 1, then after a job is stored using Auto Job Promotion, new jobs
cannot be added to the queue until the stored job has been completely
printed.
To Next Page
Loading...
