Ricoh M160 - Page 677

Error Codes
M160/M161 Fax Option 21 SM
M160/M161 FAX
OPTION
Code Meaning Suggested Cause/Action
14-08 Data Send to SMTP Server
Failed (5XX)
 Failed to access the SMTP server because
the transmission failed
 SMTP server operating incorrectly
 Destination folder setting incorrect
 Direct SMTP sending not operating
correctly.
 Software application error
14-09 Authorization Failed for
Sending to SMTP Server
 POP-Before-SMTP or SMTP authorization
failed.
 Incorrect setting for file transfer
14-10 Addresses Exceeded Number of broadcast addresses exceeded the
limit for the SMTP server.
14-11 Buffer Full The send buffer is full so the transmission
could not be completed. Buffer is full due to
using Scan-to-Email while the buffer is being
used send mail at the same time.
14-12 Data Size Too Large Transmission was cancelled because the
detected size of the file was too large.
14-13 Send Cancelled Processing is interrupted because the user
pressed Stop.
14-14 Security Locked File Error Update the software because of the defective
software.
14-15 Mail Data Error  The transmitting a mail is interrupted via
DCS due to the incorrect data.
 Update the software because of the
defective software.
14-16 Maximum Division Number
Error
 When a mail is divided for the mail
transmission and the division number of a
mail are more than the specified number,
the mail transmission is interrupted.
 Update the software because of the
defective software.