OPTION
Communication Switch 01 (SP No. 1-104-002)
No Function Comments
6-7
Maximum printable page length
available
The setting determined by these bits is
informed to the transmitting terminal in the
pre-message protocol exchange (in the
DIS/NSF frames).
Bit 7 Bit 6 Setting
0 0 No limit
0 1 B4 (364 mm)
1 0 A4 (297 mm)
Communication Switch 02 (SP No. 1-104-003)
No Function Comments
0
G3 Burst error threshold
0: Low 1: High
If there are more consecutive error lines in the
received page than the threshold, the machine
will send a negative response. The Low and
High threshold values depend on the sub-scan
resolution, and are as follows.
100 dpi
6(L)
12(H)
200 dpi
12(L)
24(H)
300 dpi
18(L)
36(H)
400 dpi
24(L)
48(H)
1
Acceptable total error line ratio
0: 5% 1: 10%
If the error line ratio for a page exceeds the
acceptable ratio, RTN will be sent to the other
end.
2
Treatment of pages received
with errors during G3 reception
0: Deleted from memory without
To Next Page
Loading...
