Ricoh M160 - Page 794

Service RAM Addresses
SM 138 M160/M161 Fax Option
Bit 5: Limit printing of subjects and texts in normal e-mail (attached TIFF files) 0: No, 1: Yes
Bit 6: Network error display 0: Displayed, 1: Not displayed
Bit 7: Transmit error mail notification 0: Enabled, 1: Disabled
6800E6(H) - User parameter switch 22 (SWUSR_16)
(This switch is not printed on the user parameter list.)
Bit 0: Dial tone detection (PSTN 1) 0: Disabled, 1: Enabled
Bits 1 to 7: Not used
6800E7(H) – User parameter switch 23 (SWUSR_17)
Bit 0 to 7: Information to be printed for transmit terminal identification (TTI)
6800E8(H) - User parameter switch 24 (SWUSR_18)
Bit 0: Store documents that could not be transmitted in memory 0: Off, 1: On
Bit 1: Length of time documents that could not be transmitted are stored in memory 0: 24hours,
1: 72 hours
Bit 2: Retain the files stored in the Document Server, regardless of the settings of [Auto Delete File
in Document Server] under [System Settings] 0: No, 1: Yes
Bit 3: Cancel the use of the fixed sentence when sending a file by e-mail 0: No, 1: Yes
6800E9(H) - User parameter switch 25 (SWUSR_19)
Bit 1:
Reception mode switch timer 0: Off, 1: On (switching Fax or Fax/Tel)
Bit 2: Mode priority switch 0: Fax first, 1: Tel first
Bit 3: Dial in function (Japan Only)
Bit 4: Not used.
Bit 5 to 7: Not used
6800EA(H) and 6800EB(H) - User parameter switches 26 and 27 (SWUSR_1A and 1B): Not
used
6800EC(H) - User parameter switch 28(SWUSR_1C): Not used
6800ED(H) - User parameter switch 29(SWUSR_1D): Not used
6800EE(H) and 6800EF(H) - User parameter switches 30 and 31 (SWUSR_1E and 1F): Not
used
6800F0(H) - User parameter switch 32 (SWUSR_20)
Bit 0: Quotation priority for a destination when there is no destination of the specified type 0:
Paper output priority = Priority order: 1. IP-fax destination, 2. Fax Number, 3. E-mail address, 4.
Folder
1: Electric putout order = Priority order: 1. E-mail address, 2. Folder, 3. IP-fax destination, 4. Fax
number
Bits 1 to 7: Not used
6800F1(H) - User parameter switch 33 (SWUSR_21): Not used
6800F2(H) - User parameter switch 34 (SWUSR_22)
Bit 0: Gatekeeper server used with IP-Fax 0: Disabled, 1: Enabled
Bit 1: SIP server used with IP-Fax 0: Disabled, 1: Enabled