OPTION
Bits 2 to 7: Not used
6800F3(H) - User parameter switch 35 (SWUSR_23)
Redial interval when sending a backup file
6800F4(H) - User parameter switch 36 (SWUSR_24)
Maximum number of redials when sending a backup file
6800F5(H) - User parameter switch 37 (SWUSR_25)
Bit 0: Whether to stop sending a backup file if the destination folder becomes full while the
machine is sending or waiting to send a fax or the backup file. 0: No, 1: Yes
Bit 2 and 3: Backup file is printed along with the TX communication failure report when a backup
file transmission failure occurs. 00: Do not print, 01: Print first page only, 10: Print whole file
Bit 4: Display the sender's information in the file name of documents that are forwarded to folder
destinations. 0: Disabled, 1: Enabled
Bit 5: Limit the file names of documents that are forwarded to folder destinations to plain
characters only. 0: Disabled, 1: Enabled
Bit 6: When using the remote fax function, the sub-machine beeps to let you know when it has
printed a received document (If you specify "On", the machine will beep according to the setting of
[Panel Key Sound] under [System Settings].)
0: On, 1: Off
6800F6(H) - User parameter switch 38 (SWUSR_26): Not used
6800F7(H) - User parameter switch 39 (SWUSR_27): Not used
6800F8(H) - User parameter switch 40 (SWUSR_28)
Bit 0: When memory space is insufficient, the machine prints and then deletes the oldest faxes,
creating memory space for storage of new faxes. 0: Disabled, 1: Enabled
6800FD (H) - User parameter switch 45 (SWUSR_2D)
Bit 0 and 1: Not used
Bit 2: File format for files transmitted to e-mail addresses and folders registered as forwarding,
destinations of backup file transmission, receivers for Personal Box, or end receivers for Transfer
Box. 0: PDF 1: PDF/A
Bit 3: Specify the criteria for printing files when forwarding them 0: Depends on Reception file
settings, 1: Do not print
680130 to 68016F(H) - Service Switches
680170 to 68017F(H) - IFAX Switches
680180 to 68018F(H) - IP-FAX Switches
680190 to 6801A3(H) - PSTN-1 RTI (Max. 20 characters - ASCII) - See the following note.
6801CF to 68020E(H) - TTI 1 (Max. 64 characters - ASCII) - See the following note.
68020F to 68024E(H) - TTI 2
68024F to 68028E(H) - TTI 3
68028F to 6802CE(H) - TTI 4
6802CF
to 68030E(H) - TTI 5
68030F to 68034E(H) - TTI 6
To Next Page
Loading...
