Rohde & Schwarz FSW26 - Page 532

Common Analysis and Display Functions
R&S
®
FSW
532User Manual 1173.9411.02 ─ 19
Name...........................................................................................................................532
Comment.....................................................................................................................532
Threshold.................................................................................................................... 532
Margin......................................................................................................................... 533
X-Axis..........................................................................................................................533
Y-Axis..........................................................................................................................533
Data points..................................................................................................................533
Insert Value.................................................................................................................534
Delete Value................................................................................................................534
Shift x.......................................................................................................................... 534
Shift y.......................................................................................................................... 534
Save............................................................................................................................534
Name
Defines the limit line name. All names must be compatible with Windows conventions
for file names. The limit line data is stored under this name (with a .LIN extension).
Remote command:
CALCulate:LIMit<k>:NAME on page 982
Comment
Defines an optional comment for the limit line. The text may contain up to 40 charac-
ters.
Remote command:
CALCulate:LIMit:COMMent on page 978
Threshold
Defines an absolute threshold value (only for relative scaling of the y-axis).
For details on thresholds see chapter 7.5.2, "Basics on Limit Lines", on page 524.
Remote command:
CALCulate:LIMit<k>:LOWer:THReshold on page 981
CALCulate:LIMit<k>:UPPer:THReshold on page 984
Display and Limit Lines