Roland VS-2400CD User Manual

10—Using the Digital Mixer
134 www.RolandUS.com Roland VS-2400CD Owner’s Manual
Switching Between Input, Track, Aux and FX Channels
You can turn the 12 physical channel strips into the channel controls you want with a
single button-press.
Channel Selection
When you want to adjust a channel’s parameters, you must first select the channel.
Selecting a Channel for Editing
Using the CH EDIT Buttons
1. Press the FADER button that selects the set of channels containing the
channel you want to work with (Page 133).
2. Press the desired input, track or FX return channel’s CH EDIT button. The
CH EDIT button lights and the channel’s parameters appear onscreen.
About the Channel Faders
Each channel strip provides a fader whose primary job is the
control of the channel’s signal level—you can also use the faders
for controlling other things, as we’ve already noted. Faders are
especially helpful when adjusting, or “riding,” signal levels during
an actual recording or mix. (You set up basic recording levels
using the SENS knobs, as described on Page 126.)
The VS-2400CD’s faders are motorized, so each fader
automatically moves to its channel’s current level setting when
you press one of the FADER buttons to select a new set of
channels. When you use Automix (Chapter 25), the faders move
up and down automatically to reflect automated level changes.
And when you load a project, the faders move to their channels’
most recent level settings.
Press... Channel Strips 1-12 control: Press... ...and Channel Strips 1-12 control:
Input Channels 1-12 Input Channels 13-16
Track Channels 1-12 Track Channels 13-24
Press... and Channel Strips 1-8 control: while Channel Strips 9-12 control:
Aux Masters Channels 1-8 FX Return Channels 1-4
An Aux master channel has no CH EDIT parameters to adjust. You can configure an
Aux bus as described on Page 201.
You can also use your mouse to select any channel from the Channel Pop-Up menu,
described on Page 69.
CH
EDIT
button
Position
markings
Fader
VS2400OMUS.book 134 ページ ２００６年２月２８日 火曜日 午前１１時１２分

Roland VS-2400CD Specifications

General

Brand	Roland
Model	VS-2400CD
Category	Musical Instrument
Language	English