Roland VS-2400CD - FX Return Channel CH VIEW Elements; Loop Fx Assign; Effect Algorithm Display

32—VGA Main Display CH VIEW Screens
420 www.RolandUS.com Roland VS-2400CD Owner’s Manual
You can adjust the send and return levels to the inserted effect
by dragging the blue insert send and return sliders—located
to the right of the processor button—up and/or down.
FX Return Channel CH VIEW Elements
LOOP FX ASSIGN
You can drag the pair of LOOP FX ASSIGN
nodes up or down with your mouse to route the
desired Aux bus or Direct path to the effect
processor associated with the selected FX return
channel. (See Page 204.)
Effect Algorithm Display
The effect algorithm display shows the effect patch being used by the effect processor
associated with the selected FX return channel. Click anywhere on the effect algorithm
display to view the processor’s Algorithm View screen on which you can select a
different patch or edit the current patch.
To select or edit an insert effect for a processor, click the effect in the
insert effect matrix—the processor’s Algorithm View screen appears
on which you can select a new patch or edit the current patch.
221
I
nser
t
sen
d
Insert return slider
LOOP FX
ASSIGN
Effect algorithm
display
Node
pair
VS2400OMUS.book 420 ページ ２００６年２月２８日 火曜日 午前１１時１２分