Roland VS-2400CD - Basic Scene Operations; Clearing a Scene; Recalling a Scene; Storing a Scene

10—Using the Digital Mixer
140 www.RolandUS.com Roland VS-2400CD Owner’s Manual
Basic Scene Operations
You can quickly and easily store and recall scenes using the
VS-2400CD’s numeric keypad when its SCENE•BANK
button is lit to show you’re in Scene mode.
Storing a Scene
1. Press SCENE•BANK if it’s not already lit.
Each scene is stored in a numbered location from 0 to 9, corresponding to the 0-9
buttons on the numeric keypad. When a scene has been stored in a location, the
corresponding number button is lit on the keypad.
2. Press any 0-9 button on the keypad to store the scene in the corresponding location.
If you’d like to store the scene in a different scene bank, follow the instructions in
“Changing Scene Banks” and press its button in the selected bank.
3. If a location already contains a scene, and you’d like to store a new scene in its
place, you’ll have to clear the older scene first. See “Clearing a Scene” on Page 140.
Recalling a Scene
1. Press SCENE•BANK if it’s not already lit.
2. If the current scene bank contains the scene you want, press the scene’s lit button
on the keypad. To recall a scene from a different bank, follow the instructions in
“Changing Scene Banks” and then press the scene’s button in the desired bank.
Changing Scene Banks
1. Press SCENE•BANK if it’s not already lit. If any scenes are stored in the currently
selected scene bank, their buttons light on the numeric keypad.
2. While holding down SHIFT, press SCENE•BANK. The button for the currently
selected bank lights solidly, and the other keypad buttons flash.
3. Press 0-9 to select the desired scene bank—if scenes are stored there, their
numbers light on the keypad.
Clearing a Scene
1. Press SCENE•BANK if it’s not already lit. If you’d like to clear a scene from a
different bank, see the instructions in “Changing Scene Banks” before proceeding.
2. While holding down CLEAR, press the desired scene’s button on the keypad. The
scene is cleared from that location, and the button’s light turns off.
Scenes can be stored and recalled only when a project isn’t
currently playing.
You can also store and recall scenes from the UTILITY menu (Page 141).
You can use the Scene feature’s Safe mode, and perform scene operations more
carefully and slowly from a list in the SCENE window. See Page 142.
VS2400OMUS.book 140 ページ ２００６年２月２８日 火曜日 午前１１時１２分