31—VGA Main Display Home Screen
410 www.RolandUS.com Roland VS-2400CD Owner’s Manual
Use the lower half of the pane for scene operations. To:
•
change scene banks
—click the desired bank’s number.
•
store a scene
—set up your mixer settings as desired and click the number of an
unused scene position.
•
recall a scene
—click the scene’s number.
•
clear a scene
—hold down CLEAR on the VS-2400CD and click the scene’s number.
The VGA Wave Display
The VGA wave display allows you to view a single track’s audio with the maximum
amount of detail for precision editing operations.
The currently selected track’s number appears at the left of the wave display. To view
other tracks, drag the vertical scroll bar up and down or click the desired vertical scroll
button. To move through the project, drag the horizontal scroll bar or click the
horizontal scroll buttons.
You can zoom in or out by clicking the wave display’s zoom buttons. To zoom:
•
vertically
—click the desired amplitude zoom button.
•
horizontally
—click the desired time zoom button.
You can also select the desired amplitude or time zoom
value from the Edit Pop-Up menu that appears when you
right-click in the wave display.
To close the wave display, click the WAVE DISPLAY button again.
To name a locator or scene—or perform other locator/scene operations—click the LOC
or SCN buttons (Page 395), respectively.
Click the WAVE DISPLAY button in the lower right-hand corner of
the playlist to open the wave display.
The time zoom is measured in samples.
235
Track
number
Track name Phrase name Magnification
Amplitude
zoom buttons
Time zoom
buttons
Amplitude zoom
Time zoom
Amplitude zoom Time zoom
VS2400OMUS.book 410 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
