Roland VS-2400CD - Assorted CH EDIT Tools; The CH EDIT VIEW Cpyprm Button; The DYN and EQ Screen RESET Buttons

11—Input and Track Channel Tools
Roland VS-2400CD Owner’s Manual www.RolandUS.com 163
Assorted CH EDIT Tools
The CH EDIT VIEW CpyPRM Button
You can copy another input or track channel’s parameter values to the current channel
from the current channel’s CH EDIT VEW screen. To do this:
1. Press F5 (CpyPRM)—the COPY MIXER PARAMETER dialog opens.
2. Set the SOURCE Ch parameter to the channel whose parameters you’d like to copy.
You can select any input or track channel.
3. The COPY TARGET select the parameters you want to copy to the current channel.
The DYN and EQ Screen RESET Buttons
If you’d like to start with a clean slate as you set up a channel’s dynamics
processing or EQ, reset all of the CH EDIT DYN and EQ parameters by pressing F5
(RESET).
Select: To copy:
ALL all of the source channel’s parameter settings to the current channel.
DYNAMICS all of the source channel’s DYN screen parameter settings to the
current channel.
EQ all of the source channel’s EQ screen parameter settings to the current
channel.
LEVEL the source channel’s FADER and Aux send levels to the current
channel.
The CpyPRM feature doesn’t copy the following track-channel-only parameters—
STATUS, V.Trk, PlyMod.
VS2400OMUS.book 163 ページ ２００６年２月２８日 火曜日 午前１１時１２分