4—Setting Up and Basic Operations
Roland VS-2400CD Owner’s Manual www.RolandUS.com 65
Setting the VS-2400CD’s Clock
The VS-2400CD time-stamps your recordings to make it easier for you to keep track of your
work. Before it can do this, you’ll need to set its clock.
1. Hold down SHIFT and press F4•UTILITY.
2. Press the PAGE button repeatedly—if necessary—until “DATE” appears above F5.
3. Press F5 (DATE). The DATE/TIME screen appears.
4. If the DATE parameter isn’t selected, use the
,
,
and
buttons to select it.
5. If the month isn’t already selected, press
to select it.
6. Turn the Time/Value dial until the current month is displayed.
7. Press
and turn the Time/Value dial to choose today’s date.
8. Press
and turn the Time/Value dial to choose the current year.
9. Press
and turn the Time/Value dial to choose the desired DATE FORMAT setting.
Dates can be shown on the display in any of the following styles:
10. Press
to select the TIME parameter.
11. Turn the Time/Value dial to select the current hour.
12. Press
and turn the Time/Value dial to select the minute, and then second.
13. Press F5 (SET) to confirm your changes.
14. Press F6 (EXIT) to leave the DATE/TIME screen and finish the procedure.
A Few Fundamental Concepts
Selection
Before you can change something in the VS-2400CD, you must first select it. In the case
of physical controls, it’s obvious: before you can move a fader, you’ve got to grab it with
your fingers. This rule also applies to items shown on the VS-2400CD’s display. When
you select something on the display, you’re telling the VS-2400CD you want to do
something to the thing you’ve selected. The two most common ways to make a selection
are to use the cursor buttons or to click the desired item with your mouse. Once you’ve
made a selection, you can make the desired change using the appropriate tool.
When you select one displayed item and then another, you’re
moving the “selection cursor.”
The VS-2400CD shows you what’s currently selected. Often, the
selected item becomes “highlighted” —its colors are inverted. Text,
for example, becomes white with a dark background.
When you select a box in which you can enter data or choose a
different value, the box’s outline becomes darkened.
This value: Displays dates as:
mm/dd/yyyy 07/12/2001
dd/mm/yyyy 12/07/2001
yyyy/mm/dd 2001/07/12
MMM.dd ‘YY Jul. 12, ‘01
dd MMM ‘YY 12 Jul ‘01
The VS-2400CD uses 24-hour time: Midnight is Hour 00, 1 am is 01, and 1 pm is
Hour 13.
Selected
Not selected
VS2400OMUS.book 65 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
