32—VGA Main Display CH VIEW Screens
Roland VS-2400CD Owner’s Manual www.RolandUS.com 417
At the top edge of an input and track channel CH VIEW screen is information about the
corresponding hard disk recorder track and its V-Tracks. If you’re working with:
•
an input channel
—the screen shows information regarding the same-numbered
hard disk recorder track.
•
a track channel
—the screen shows information about its corresponding track.
If the channel is linked, you’ll see track info for both of the corresponding tracks.
Dynamics and EQ Controls
A track or input channel CH VIEW screen may contain a dynamics processor and EQ
that can be set up by dragging your mouse in a graphic display, or manually.
Dynamics
1. DYNAMICS On/Off Button
Turn the dynamics processor on or off by clicking this button—
when it’s blue, the processor is turned on.
2. RESET Button
Click RESET to return the dynamics processor to its factory default settings.
Interactive graphic displays
Parameters
For an introduction to
dynamics processing,
see Page 153.
For an introduction to
EQ, see Page 157.
Compressor
parameters
Expander
parameters
Type-specific parameters
1. 2.
4.
3.
5.
VS2400OMUS.book 417 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
