Roland VS-2400CD - Page 418

32—VGA Main Display CH VIEW Screens
418 www.RolandUS.com Roland VS-2400CD Owner’s Manual
3. Interactive Dynamics Display
The interactive dynamics display lets you draw the shape of
your processing. Click and drag on any of the red triangles to
set the corresponding dynamics parameter.
4. Dynamics Type Selector
Click the desired button to select the type of dynamics processing you
want to use.
5. IN/OUT/GR Meters
These meters show, respectively, the signal coming into the processor, going out of it,
and the amount of dynamics processing being applied.
Type-Specific Parameters
The type-specific parameters change according to the type of dynamics processing you
select. These parameters are described in Chapter 11.
Compressor Parameters
EQ
Page 156 explains how to understand what you see in the
graphic dynamics display.
Parameter: For compressor, see: For expander, see:
KEY IN Page 156 Page 156
RATIO Page 154 Page 154
THRESHOLD Page 154 Page 154
ATTACK Page 155 Page 155
RELEASE Page 155 Page 155
A.GAIN Page 155 not applicable
LEVEL Page 155 not applicable
1. 2.
3.
4.
VS2400OMUS.book 418 ページ ２００６年２月２８日 火曜日 午前１１時１２分