4—Setting Up and Basic Operations
70 www.RolandUS.com Roland VS-2400CD Owner’s Manual
Channel Pop-Up Menu
If you’re using a mouse, you can also select a new input, track or FX return channel from
any screen on which the currently selected channel’s number is displayed as shown here.
To select a new channel:
1. Click the channel number. The Channel Pop-Up menu appears.
2. Move the cursor to the desired channel and click.
Using an ASCII Keyboard
After you’ve connect an ASCII keyboard to the PS/2 KEYBOARD jack, and activated it
(Page 64), you can use the keyboard to perform the following actions.
What You Can Do With an ASCII Keyboard
UNDO and REDO
Undo
The Undo function allows you to reverse—or “undo”—track recording and editing
operations. Each project remembers up to 999 of your most recent recording and
editing actions and can restore the project to the state it was in before each action.
You can use the keyboard’s: To:
Letter and number keys enter names for projects, tracks, scenes, locators, etc.
Space bar start, stop and continue project playback
Arrow keys move the cursor on the VS-2400CD’s display
SHIFT+arrow keys zoom in and out vertically and horizontally
Home display the Home screen
F7 display the EZ Routing VIEW screen
SHIFT+F7 display the EZ Routing P.BAY screen
SHIFT+F8 display Mastering Room screen
Ctrl+S store the current project
Ctrl+Alt+Delete shut down the VS-2400CD
And the keyboard’s: Acts as the VS-2400CD’s:
F1-F6 F1-F6 buttons
Tab the PAGE button
Enter the ENTER/YES button or left mouse button
Esc the EXIT/NO button
F9 the PROJECT MENU button
F10 the TRACK MENU button
F11 the EFFECT MENU button
F12 the UTILITY MENU button
Input channel Track channel FX return channel
VS2400OMUS.book 70 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
