Roland VS-2400CD - Channel Fader

33—VGA Main Display Mixer Views
436 www.RolandUS.com Roland VS-2400CD Owner’s Manual
3. SOLO (S) Button
4. AUTOMIX STATUS (A) Button
5. Channel Fader
Drag a fader group’s onscreen fader up or down to set the fader group’s level—this is
the same as moving its physical fader.
To solo the fader group, click the SOLO button to light it. To un-solo the
group, click the button again.
When Automix is turned on, repeatedly click the AUTOMIX STATUS
button to set the fader group’s Automix status.
138
318
VS2400OMUS.book 436 ページ ２００６年２月２８日 火曜日 午前１１時１２分