EasyManua.ls Logo

Roland VS-2400CD - Clock Source

Roland VS-2400CD
508 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Supplemental Information
Roland VS-2400CD Owner’s Manual www.RolandUS.com 447
INPUT STATUS A-D
The INPUT STATUS display provides information about input signals received by the
AE-7000’s A/D input converters. There are four kinds of information displayed
regarding each of the four inputs, A, B, C and D. The displayed information is explained
in the following sections.
TYPE
Shows the format of the received digital audio:
TYPE1
—is AES/EBU-format digital audio.
TYPE2
—is IEC 60958-format digital audio.
“--”
—means that there’s no input signal.
COPY PROTECT
COPY PROTECT reveals the presence of SCMS copy-protection in the input signal.
On
—means that SCMS copy-protection data is present in the input signal.
Off
—means that no SCMS copy-protection data is present in the input signal.
“--”
—means that there’s no input signal.
EMPHASIS
Emphasis boosts the high-frequency content of digital audio signals. If EMPHASIS is:
On
—emphasis signals are present in the digital audio.
Off
—there’s no emphasis applied to the digital audio.
“--”
—means that there’s no input signal.
SAMPLING FREQ
SAMPLING FREQ shows the sample rate of the received digital audio, from 32k to 48k.
“Unlock” is displayed if:
there’s no signal. there’s no master clock
the signals are outside the supported sample frequency range.
CLOCK SOURCE
CLOCK SOURCE selects the master clock timing reference for the AE-7000. This
parameter interacts with the VS-2400CD’s MASTER CLOCK parameter (Page 128).
When the VS-2400CD’s MASTER CLOCK parameter’s value is R-BUS, the
AE-7000’s CLOCK SOURCE should be set to INPUT A or WORD CLOCK.
When the VS-2400CD MASTER CLOCK is set to INT, DIGITAL IN or EXT TIME
CODE, the AE-7000’s CLOCK SOURCE should be set to R-BUS.
The following table explains the CLOCK SOURCE values and tells you how to set the
VS-2400CD’s MASTER CLOCK parameter with each AE-7000 CLOCK SOURCE value.
Turn down the volume for all connected equipment before changing the CLOCK
SOURCE value to avoid damage to your equipment.
VS2400OMUS.book 447 ページ 2006年2月28日 火曜日 午前11時12分

Table of Contents

Other manuals for Roland VS-2400CD

Related product manuals