Roland VS-2400CD - V-Fader Control Messages

Supplemental Information
Roland VS-2400CD Owner’s Manual www.RolandUS.com 465
V-Fader Control Messages
The V-Fader feature—Page 286—allows you to send the following Control Change
messages from the VS-2400CD’s faders.
Control Change: Range: Control Change: Range:
CC 0 (BankSelMSB) 0-127 CC66 (Sostenuto) 0-127
CC1 (Modulation) 0-127 CC67 (Soft) 0-127
CC2 (Breath) 0-127 CC68 0-127
CC3 — CC69 (Hold 2) 0-127
CC4 (Foot) 0-127 CC70 0-127
CC5 (Porta Time) 0-127 : :
CC6 (DataEntryMSB) 0-127 CC83 0-127
CC7 (Volume) 0-127 CC84 (Porta Ctrl) 0-127
CC8 (Balance) 0-127 CC85 0-127
CC9 — : :
CC10 (Pan) 0-127 CC90 0-127
CC11 (Expression) 0-127 CC91 (Reverb Send) 0-127
CC12 0-127 CC92 (EFFECT 2) 0-127
: : CC93 (Chorus Send) 0-127
CC31 0-127 CC94 (EFFECT 4) 0-127
CC32 (BankSelLSB) 0-127 CC95 0-127
CC33 0-127 : 0-127
: : CC97 0-127
CC37 0-127 CC98 (NRPN LSB) 0-127
CC38 (DataEntryLSB) 0-127 CC99 (NRPN MSB) 0-127
CC39 0-127 CC100 (RPN LSB) 0-127
: : CC101 (RPN MSB) 0-127
CC63 0-127 : :
CC64 (Hold 1) 0-127 CC119 0-127
CC65 (Portamento) 0-127
VS2400OMUS.book 465 ページ ２００６年２月２８日 火曜日 午前１１時１２分