27—UTILITY Menu Parameters
358 www.RolandUS.com Roland VS-2400CD Owner’s Manual
PREVIOUS/NEXT SW
The PREVIOUS/NEXT Sw parameter, discussed on Page 183, sets the behavior of the
PREVIOUS and NEXT buttons. You can set it to:
•
PHRASE
—so that pressing PREVIOUS or NEXT moves the now line to the previous
or next edge, respectively, of a phrase.
•
MARKER
—so that pressing PREVIOUS or NEXT moves the now line to the
previous or next marker, respectively.
LOCATOR/SCENE TYPE
The LOCATOR/SCENE TYPE parameters activates or de-activates the Safe mode for
selecting locators and scenes, as described on Page 181 and Page 142, respectively.
NUMERICS TYPE
With NUMERICS TYPE set to:
•
Up
—numbers are entered from the numeric keypad or a keyboard from right to
left, like a calculator.
•
Down
—numbers are entered from left to right.
RETURN TO LOCATE Sw
You can set the VS-2400CD so that the keypad defaults to the selection of locators—
automatically exiting Scene mode after a scene is selected—as described on Page 141
and on Page 181.
EDIT POINT Sw TYPE
Edit Point Sw Type sets the behavior of the IN, OUT, FROM and TO buttons. See
“Configuring the Behavior of the IN, OUT, FROM and TO Buttons” on Page 234.
UNDO MESSAGE
This parameter turns the displaying of the Undo list (Page 70) on or off. If you press
UNDO when the parameter’s set to:
•
Off
—the last action is reversed immediately. This setting lets you undo the most
recent action in the fastest way possible.
•
On
—the Undo list appears, allowing to select the desired Undo level.
EDIT MESSAGE
When you perform various types of editing on the VS-2400CD, you can view edit
messages that allow you to adjust parameters relating to the edit—see “Edit Messages”
on Page 237.
GRID MODE
The setting of the GRID MODE parameter determines how audio regions and phrases
snap to their editing grid. To learn about the grid, see “Snapping to Grid” on Page 243.
You can turn this parameter on and off in the Edit and Automix Edit Pop-Up menus.
VS2400OMUS.book 358 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
