25—Automix
Roland VS-2400CD Owner’s Manual www.RolandUS.com 329
Micro-Editing Automix Data
1. To view the desired Automix track’s data, press F1 (Tr Inc) or F2 (Tr Dec) to move
higher or lower, respectively, through the currently targeted Automix tracks. The
current track’s name and data is shown above the list of its Automix events.
2. Press
or
to select the desired event in the list, and:
•
To change an Automix event’s location
—Use
and
to select the desired unit of
time measurement. You can select time code or measures/beats/ticks. Turn the
TIME VALUE dial to select the desired start location.
•
To change an Automix event’s value
—Use
and
to highlight the event’s value
and turn the TIME VALUE dial to select the desired value.
Deleting an Automix Event
1. Press
or
to select the event in the list.
2. Press F4 (DELETE) to erase the selected Automix event.
Creating a New Automix Event
1. Press
or
to select an Automix event of the type you want to create.
2. Press F3 (CREATE) to place a copy of the currently selected Automix event at the
selected event’s location.
3. Edit the new Automix event’s location and value as desired.
Undoing an Automix Micro-Edit
1. Press F5 (UNDO). Until you record more Automix data or perform a new Automix
edit, you can press F5 (REDO) to reverse the undo.
Automix and V-Link
V-Linking lets the VS-2400CD work seamlessly with video editing and presentation
devices—see Page 304. The VS-2400CD’s Automix feature allows you to program a
series of video clips that a presentation device is to play.
You can insert V-Link Automix events into a project on the Automix MICRO EDIT
screen described on the previous page. You can enter two types of V-Link Automix
events at the desired project times:
•
BANK events
—select banks of video clips in the video equipment.
•
CLIP events
—trigger the playing of specific clips in the currently loaded clip bank.
•
ALL events
—that trigger all of the clips in a bank in sequential order.
You can see the changes you make in the data window above the phrase list.
If you can find an event at the desired location that’s the same type of Automix event as
the one you want to create, select it to save time.
If you create a new event on an Automix track with no other events, the VS-2400CD
creates a Level event.
To micro-edit a V-Link event, select it as an Automix editing target, as described on
Page 323.
VS2400OMUS.book 329 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
