2—Getting Around
38 www.RolandUS.com Roland VS-2400CD Owner’s Manual
17—EZ ROUTING Button
Press EZ ROUTING to set up, load and save signal routings in the VS-2400CD:
18—AUTOMIX Button
Press this button to turn Automix on (lit) or off (unlit). Hold down SHIFT and press
AUTOMIX to view the AUTOMIX SETUP screen. See Chapter 25, starting on Page 315.
19—SOLO
Press SOLO to enter and exit Solo mode (Page 138).
20—MUTE
Press MUTE to enter and exit Mute mode (Page 138).
To learn about see:
Routing input signals to input channels Chapter 9
Routing input channels to tracks Chapter 12
Recording tracks onto other tracks Chapter 14
Routing FX return channels to tracks Chapter 17
Configuring the digital inputs Chapter 9
Activating and de-activating phantom power Chapter 9
Setting up output signals Chapter 21
Sending channels to the internal effects Chapter 16
Saving and loading EZ Routing templates Chapter 22
Clearing routings Chapter 22
Initializing routings Chapter 22
Routing
VS2400OMUS.book 38 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
